Mit-Ivy Industrie Metall Advanced Acryl Latex Dichtung Primer mat exzellenter Penetratiounskraaft
Uwendung
Et huet exzellent Adhäsioun u Stahlsubstraten an ähnleche Waasserbasis Primer, an exzellent physesch a mechanesch Eegeschafte nodeems d'Faarwelle gedréchent ass.
5. De Lackfilm huet exzellent Liichtkonservatioun a Faarfkonservatioun nom Trocknen.
Recommandéiert Uwendung Et ass gëeegent fir den Drainage-Schutz vu Camionen, Maschinendeeler, liicht industriell Ausrüstung, asw. Wou héich Schutz erfuerderlech ass.
Technesch Daten Faarf assortéiert
Uewerflächentrock (50% Mëschbarkeet) 15 ℃ C <1h h 25'C <0,5h
Zolitt dréchen (50% Fiichtegkeet) 15'C <48h; 25 ° C <24h
Hits "kg.cm" 50
Waasser (50 ± 5μm) 72h Lackfilm bläert net, hëlleft net ze falen, net rust.
Hardness 0.3 (Duebel Pendel) Mechanesch Eegentest Filmdicke (23 ± 3jμm)
Adhesioun (Hegelian) Niveau 1
Uewerflächenbehandlung D'Uewerfläch vum beschichteten Material soll fräi vu Fiichtegkeet, Ueleg, sauer Kuelestoff an Asche sinn.
Séier Detailer
Stol mat Oxid Haut: Schéissstrahlen oder Sandstrahlen Methoden wéi Veraarbechtung op Sa2.5 Niveau, wou Sandstrahlen net gemaach kënne ginn mechanesch poléiert oder
Chemesch behandelt fir all schwammend futtis Schëlleren ewechzehuelen.
Stol ouni Oxid Haut: Sandstrahlt (geschossstrahlt) op Sa2.5 oder Loftaktiverte, Elektresch Schleifmaschinn op St3.
Schweißen, Flammeschneiden oder Freedefeierkorrektur vu verbrannte Bogenberäicher: Schleifen op St3 Niveau.
Basismaterial mat alem Faarffilm: entfernt al Lackpartikelen a Rost, a Sand op St3 mat Loft oder elektreschem Schleifgeschir.
Typesch Molerei Package kann mat H902 Waasserbasis Primer benotzt ginn, oder alleng als allgemeng dekorativ Topcoat benotzt ginn, oder mat aneren Aarte vu Primer Produkter benotzt ginn (musse fir d'Verifikatioun ugepasst ginn).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
